Register   |   Login

Print

[Technical Inquiry] Receiving data ADAM 4571 through Modbus Poll Simulator

Receiving data ADAM 4571 through Modbus Poll Simulator

Hi everyoneI have there hardware's:  ADAM-4051, 4017 and ADAM 4571.
The ADAM-4051, 4017 modules protocol is configured based on the Modubus protocol
I want to use ADAM 4571 to exchange data from Advantech I/O module and receiving through Modbus Poll Software.



I've made the settings for ADAM 4571 through the software (Serial Device Server Configuration Utility). But the connection is disconnected and time out.

I would like to have your opinion and any solution on this config, also any document showing the basic like how to read data from Ethernet network (Modbus TCP).
Thank you in advance.



[ Last edited by saeed3732 at 2019-6-5 16:01 ]
Attachment: Your usergroup does not have permission to access attachments

TOP

Quick search in Advantech Support Portal