Register   |   Login

Print

[Technical Inquiry] 5510EKW/TP-CE int* mode problem

5510EKW/TP-CE int* mode problem

when i in the initial mode i transfer the file simu5ke.exe to drive d when file is transferring i cancel the process of transferring after that plc does not go into int* modepwr and run led permanently lit either i press the reset button
when i run the utility and run the cmd  and press the reset button it shows the following message
C:\>path d:
C:\>path c:
C:\>kwset.exe
D:\>if not exist
D:simu5ke.exe goto end
D:\>simu5ke.exe
*unsported miniBIOS call, INT etc.
some body can tell me how can i enter the int* mode nowplease someone help me on this topic plz:'(

[ Last edited by alisher70009 at 2018-5-27 03:41 ]

TOP

Quick search in Advantech Support Portal