Register   |   Login

Print

[Technical Inquiry] Is it possible to insert condictonal comparassion functions in the KW multiprog?

Is it possible to insert condictonal comparassion functions in the KW multiprog?

Hi,
I am using the KW Multiprog to program an Adam 5510KW PLC.
In my logic I need to use conditional functions as the comparation blocks only in some situation, after a bit became On as example. However, if I try to use the en/eno functions configuration, the software shows an error and do not make the downlaod to the PLC.
The error message is this:
EN/ENO are not supported for configuration 'Configuration'. (Specific Code Generator)
Internal error: overflow. (Specific Code Generator)
Illegal instruction @FUPAR 0. (Specific Code Generator)
Illegal instruction @FUPAR 0. (Specific Code Generator)
Illegal instruction @FURET 0. (Specific Code Generator)
Illegal instruction @FUCA 0. (Specific Code Generator)


How can I fix it?

TOP

Use the SEL block. Like the attached picture.
ENENO are not accepted by the KW_DOS kernel in the 5510
Attachment: Your usergroup does not have permission to access attachments

TOP

I will try that.Thanks my friend!

TOP

Quick search in Advantech Support Portal