Register   |   Login

Print

COM3 and Disk Controller in UNO-1170

COM3 and Disk Controller in UNO-1170

Dear Sirs,

I´m trying to install Windows XP on a UNO-1170 and I have two problems:

1. COM3 is not detected, only COM1 and COM2. There´s no drivers for this COM3 in the Advantech web.

2. Device manager detects a 'Standard Floppy Disk Controller', marked in yellow (!), but I don´t know which device it is and how to remove it...

Any ideas?

Best regards and thanks for your help.

TOP

Dear cww,

1. In UNO-1170 for COM3 there is some ISA bridge, so sure it will not be Plug&Play. You can try Add New Hardware manually Address 3E8-3EF.

2. In BIOS ~Advanced Chipset ... there should be "Report no FDD for WIN95" or sth like this. Please make also sure in Standard CMOS Settings there is no any A: Drive set.
Warsaw/Poland

TOP

Thank you

Thank you very much.I have solved the problem off COM3.But the Second problem have not solved,the drive A is seted none,but no use.

TOP

Please refer attachment, maybe that can help you.
Thanks for your welcome.
Attachment: Your usergroup does not have permission to access attachments

TOP

Thank you!

TOP

Quick search in Advantech Support Portal