vicente.villar

Hello, i have a 5510EKW/TP plc.  Anybody can help my,  who  can configure Physical Hardware\IO_Configuraion section in KW Multiprog for Modbus/TCP server functions.

Thanks for your help.

BRIGIDO

Dear Vicente ,

First of all I will guide you to refer to the manual of ADAM 5510KW , where you can find some mapping table between
the KW Tags and Modbus Tags

You only need to map the Internal register of KW ( chapter 5 of the Manual ) to the realted %MX(D)(MD)3.X register

Attach I have add a small DOC file with some screenshots form KW how it can be done

If you still have further Qisetion you can contcat me via email below.

Mit freundlichen Grüßen / Best Regards / Cordialement

Brigido Reyes
Advantech European Technical Center Leader FAE
eMail: brigido.reyes@advantech.de

thomasindo

This is my example for Modbus Address Mapping. Hope this could help you.

I have try, it working.

jeyaJeya

Hi i can't view the image ,.. can you post it again...Also kindly reply whether the attached image is correct output for 2.5 V standard universal input..